Importing Data into All Setups in an Active DUT or All DUTs in the Model
| 2 |
Select File > Import Data and choose one of the following: |
- All Setups in Active DUT
- All DUTs in Model
- The dialog box that appears has three columns (DUT, Setup, Data Filename) and a Fill Data Type selection area.
| 3 |
Specify a filename for each setup. You can type the path and filename directly in the Filename field, or use the Browser to select it. |
| 4 |
Click Apply each time you specify a filename for a setup. |
| 5 |
Select a fill data type. |
| • |
Measured if available, otherwise Simulated: Outputs of type M or B receive mdm data in their measured array. Outputs of type S receive mdm data in their simulated array. |
| • |
Measured only: Outputs of type M or B receive data in their measured array. Outputs of type S do not receive any data. |
| • |
Simulated if available, otherwise Measured: Outputs of type S or B receive mdm data in their simulated array. Outputs of type M receive mdm data in their measured array. |
| • |
Simulated only: Outputs of type S or B receive mdm data in their simulated array. Outputs of type M do not receive any data. |
Tips
| • |
To view the header of an MDM data file, select the Setup cell in the dialog box, enter the corresponding MDM filename, then click View. |
| • |
To create the inputs and outputs for a new setup from the header of an MDM file, first create a new setup, select the setup name in the dialog box, enter the corresponding MDM filename, and click Create. |
See Also
|
