Calibration
If you want IC-CAP to use your Channel Gain and Skew calibrations (performed via the front panel) follow these guidelines:
| 1 |
For a skew calibration, perform a dummy measurement, to get the time axis parameters downloaded. |
| 2 |
Follow the instructions in the Front-Panel Reference for Gain and/or Skew calibration. |
| 3 |
Continue with IC-CAP measurements. |
| 4 |
If the time window is changed while using skew calibration, this procedure should be repeated. |
The instrument should be powered-on for 15 to 30 minutes before attempting calibration.
|
