| Graduate Use of Lightning Lab |
|
| STL = Stereo-Lithography (3-D Printing) |
| PCB = Printed Circuit Board |
| Registration |
- Register for training by sending a request to help@ece.ubc.ca.
- Attach completed authorization form.
- Indicate whether you want training for the STL or PCB machine.
- After training is complete, request access to MCLD 253 (STL) or MCLD 257 (PCB).
|
| Use |
| PCB |
- Calibrate machine before starting(scratch test).
- Replace tools in cartridge only after the usage counter expires.
- ALWAYS reset usage counter after replacing a tool witih a new one.
|
| STL |
- Consult usage calendar to determine machine that has sat idle the longest.
- Use this machine to generate your parts.
- Once complete, weigh entire part (build + support material) on scale.
- Record weight in Log Book on Supervisor's page.
- Record first initial of machine used on usage calendar.
- Clean up machine build tray and move print head to park position.
|
| Costs |
| PCB |
$30 per board (8" x 11") |
| STL |
$1 per gram (build AND support) |
- Billing will be issued quarterly.
- Bills totalling less than $100 will be delayed until subsequent quarter.
|
| Lab Rules |
- No food or drink is allowed.
- Lab access is not transferable
- Only authorized users are permitted to be in the lab.
|
| |
| |
| |
| |
| |
|
|
