***** UBC ECE E-HUB *************** ***** Keysight ENA E5061B LOG BOOK 16034G SMD Test Fixture (shunt reflection) 16192A SMD Test Fixture (shunt reflection) 16201A-001 7mm adapter kit 85031B 7mm Economy mechanical cal kit 16047E Lead test fixture (Gain-Phase) ***** ***** Submit any new entries by e-mail to: robertor [at] ece.ubc.ca ***** Entries include tips, bugs, damage reports, custom improvements, etc. **** DOCUMENT HISTORY **** Created: 22/May/2024 from old SoC version dated 28/Jul/2014, last updated on the same date. **** Last Change: 06/May/2025 **** Version: 4.03.02 **** version digits indicate # updates of type: [ description, maintenance, user ] ***** STATUS: ------------------------------------------------------------------------------------ ** 1. INSTRUMENT DESCRIPTION ***** 1.1 ORIGIN ICICS Project# 20419 "Expansion of ICICS Facilities in Biomedical Technologies, Emergency Decision-Support, and Global Communications Systems" Awarded to the RSL lab (Dave Michelson) By 202X the instrument required a new motherboard to upgrade from WXP and there was no available e-Cal for it. By 2023 the instrument would fail to boot On Aug 2023 the instrument was assigned to the eHUB, was sent for repairs and upgraded (RT520835) ***** 1.2 CAPABILITIES 5 Hz to 3 GHz 50 Ohm S-parameter test set Gain-phase test port (1 MO / 50 O inputs) DC-bias source Impedance analysis function ***** 1.3 CONFIGURATION WE HAVE SN: MY49101568 ECE: http://m1022-k-e5061b.ece.ubc.ca/ MAC ADDRESS: 00:20:0c:7f:49:8d Options: 3L5 Test Set, LF-RF network analyzer with DC bias source, 5 Hz to 3 GHz 0 to ± 40 V (100 mA max) 1E5 Time base, High stability option 020 Storage, Standard storage 721 Interface, GPIB port 731 Interface, 24 bit I/O port interface 005 Software, Impedance Analysis for LF-RF VNA E5007a-1FP Impedance analysis 16034G SMD Test Fixture, minimum SMD size of 0.6(L) x 0.3(W) [mm] 16192A Parallel Electrode SMD Test Fixture, minimum SMD size of 1(L) [mm] DC to 2 GHz DUT length 1mm-20mm DUT width 0.5mm-5mm DUR height 0.5mm - 5mm 16201A-001 7mm adaptet kit required for the two test fixtures above 85031B 7mm Economy mechanical cal kit for the adapter above 16047E Test fixture for lead type devices of up to 120 MHz ***** 1.4 MANUALS https://people.ece.ubc.ca/~eng-services/files/eHUB/Bench3-Parametric/ ------------------------------------------------------------------------------------ ** 2. INSTRUMENT MAINTENANCE 21/May/2024 Roberto: Re-activated the Impedance Analysis Option Using the "SIGN=" from a lic file I downloaded at: https://ksm.software.keysight.com/view-product To enter, on the instrument interface press: [SYSTEM] > (Service Menu) > (Enable Option) 14-21/May/2024 Roozbeh: Added the ENA to the MCLD Network RT557912 00:20:0c:7f:49:8d m1022-K-E5061B Windows 10 Enterprise LTSC, ENA Network Analyzer E5061B 5Hz-3GHz; Celeron CPU 8GB RAM 28/07/2014 Roberto: Installed perpetual license for option E5007A-1FP, Impedance Analysis Total cost CA 2,990.85 was paid by ICICS. For this Fatima confirmed with campus CFI office. For the installation I used network settings of instrument sample1. This was unnecessary since the whole process culminated with a license key being emailed to me that I entered via the ENA GUI. I also tried to run windows update for the ENAs WXP but it would fail. ------------------------------------------------------------------------------------ ** 3. USER ENTRIES 09-12/Oct/2024 Khoa, Roberto: Installed the bracket for the 16192A terminal adapter for the Shunt Reflection test fixture. The bracket is at the front right and does not interfere with the folding leg. See this image: https://people.ece.ubc.ca/~eng-services/files/eHUB/Bench3-Parametric/ENA_E5061B_VNA/Impedance%20measurement%20fixtures/How%20to%20install%20the%2016201A%20adapter.jpg 22/May/2024 Roberto: Posted this LOG and Instrument documents at: https://people.ece.ubc.ca/~eng-services/files/eHUB/Bench3-Parametric/