function mpc = node_14
% These data are collected from:
% S. Civanlar, J.J. Grainger, H. Yin, S.S.H. Lee, "DISTRIBUTION FEEDER
% RECONFIGURATION FOR LOSS REDUCTION," IEEE Trans. Power Syst., vol. 3, no.
% 3,pp. 1217-1223,July 1998.
%% MATPOWER Case Format : Version 2
mpc.version = '2';

%%-----  Power Flow Data  -----%%
%% system MVA base
mpc.baseMVA = 100;

%% bus data
%	bus_i	type	Pd	Qd	Gs	Bs	area	Vm	Va	baseKV	zone	Vmax	Vmin
mpc.bus = [
	1       3	0       0	0	0	1	1	0	20	1	1.05    0.95;
	2       1	2       1.6	0	0	1	1	0	20	1	1.05	0.95;
    3       1   3       1.5	0	1.1	1	1	0	20	1	1.05	0.95;
	4       1	2       0.8	0	1.2	1	1	0	20	1	1.05	0.95;
    5       1	1.5 	1.2	0	0	1	1	0	20	1	1.05    0.95;
	6       1	4       2.7	0	0	1	1	0   20	1	1.05    0.95;
	7       1	5       3	0	1.2	1	1	0   20	1	1.05	0.95;
	8       1	1       0.9	0	0	1	1	0   20	1	1.05	0.95;
    9       1   0.6 	0.1	0	0.6	1	1	0   20	1	1.05	0.95;
	10      1	4.5     2	0	3.7	1	1	0   20	1	1.05	0.95;
    11      1	1       0.9	0	0	1	1	0   20	1	1.05	0.95;
	12      1	1       0.7	0	1.8	1	1	0   20	1	1.05	0.95;
    13      1   1       0.9	0	0	1	1	0   20	1	1.05	0.95;
	14      1	2.1     1	0	1.8	1	1	0   20	1	1.05	0.95;
    ];

%% generator data
%	bus	Pg	Qg	Qmax	Qmin	Vg	mBase	status	Pmax	Pmin	Pc1	Pc2	Qc1min	Qc1max	Qc2min	Qc2max	ramp_agc	ramp_10	ramp_30	ramp_q	apf
mpc.gen = [
	1	10	10	100	-100	1 100 1	100	0	0	0	0	0	0	0	0	0	0	0	0;
];

%% branch data
%	fbus	tbus	r	x	b	rateA	rateB	rateC	ratio	angle	status	angmin	angmax
mpc.branch = [
    1	2	0.075	0.1 	0	100	100	100	0	0	1	-360	360;
    2	3	0.08	0.11	0	100	100	100	0	0	1	-360	360;
    2	4	0.09	0.18	0	100	100	100	0	0	1	-360	360;
    4	5	0.04	0.04	0	100	100	100	0	0	1	-360	360;
    1	6	0.11	0.11	0	100	100	100	0	0	1	-360	360;
    6	7	0.08	0.11	0	100	100	100	0	0	1	-360	360;
    6	8	0.11	0.11	0	100	100	100	0	0	1	-360	360;
    7	9	0.11	0.11	0	100	100	100	0	0	1	-360	360;
    7	10	0.08	0.11	0	100	100	100	0	0	1	-360	360;
    1	11	0.11	0.11	0	100	100	100	0	0	1	-360	360;
    11	12	0.09	0.12	0	100	100	100	0	0	1	-360	360;
    11	13	0.08	0.11	0	100	100	100	0	0	1	-360	360;
    13	14	0.04	0.04	0	100	100	100	0	0	1	-360	360;
    3	9	0.04	0.04	0	100	100	100	0	0	1	-360	360;
    8	12	0.04	0.04	0	100	100	100	0	0	1	-360	360;
    5	14	0.09	0.12	0	100	100	100	0	0	1	-360	360;
];

